| R500-9 NSK CYLINDRICAL ROLLER BEARING | Fatigue load limit Pu:0.915 kN; Basic dynamic load rating C:33.2 kN; s1:30.2 mm; A3:3.2 mm; A1:14 mm; SWN:7 mm; DN:6.5 mm; N4:2 mm; d:41.275 mm; J:148.5 mm; Db2:111 mm; Recommended diameter for attachment bolts, inch G:0.5625 in; L:111 mm; Rα:45 °; A:39 mm; Housing material:Cast iron; Recommended diameter for attachment bolts, mm G:14 mm; J7:18 mm; Limiting speed:4300 r/min; Recommended tightening torque for grub screw:6.5 N·m; |
| 67390/6732 NSK CYLINDRICAL ROLLER BEARING | Accessories:One Shield & Snap-Ri; Oil Speed Rating Open/Shielded n2:2600 rpm; B:46.00 mm; Sealed Speed Rating n3:1400 rpm; Basic Dynamic Radial Load Rating C:190000 N; D:280.0000 mm; Basic Static Radial Load Rating Co:200000 N; d:180.000 mm; Grease Speed Rating Open/Shielded n1:2000 rpm; Fillet Radius ra:2.00 mm; |
| EE116050/116097 NSK CYLINDRICAL ROLLER BEARING | Oil Speed Rating Max. n2:4000 rpm; d:20.640 mm; X-L-O Part Number:55-17; D:50.8000 mm; B:25.40 mm; Preload:80 lb; Fillet Radius ra:1.00 mm; Keyway e:21.4 mm; Keyway f:1.6 mm; Oil Mist Speed Rating Max. n3:6000 rpm; Grease Speed Rating Max. n1:2000 rpm; |
| 30336 NSK CYLINDRICAL ROLLER BEARING | d:55.000 mm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:8320 N; Basic Static Radial Load Rating Co:7350 N; B:9.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; D:72.0000 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Sealed Speed Rating n3:5180 rpm; Fillet Radius ra:0.30 mm; |
| 67389/6732 NSK CYLINDRICAL ROLLER BEARING | da:34.4 mm; ra max.:0.3 mm; s max.:0.8 mm; Mass bearing:0.088 kg; db:29.5 mm; F:30 mm; D:40 mm; E:35 mm; Reference speed:13000 r/min; Basic dynamic load rating C:18.7 kN; Da:35.5 mm; r1,2 min.:0.3 mm; Basic static load rating C0:34 kN; d:25 mm; Limiting speed:15000 r/min; Db:30.6 mm; B:17 mm; Fatigue load limit Pu:4.05 kN; |
| LM522546/LM52251 NSK CYLINDRICAL ROLLER BEARING | Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; Sealed Speed Rating n3:2700 rpm; B:20.00 mm; Basic Dynamic Radial Load Rating C:42300 N; D:140.0000 mm; Basic Static Radial Load Rating Co:41500 N; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:5300 rpm; d:100.000 mm; |
| 32976 NSK CYLINDRICAL ROLLER BEARING | Limiting speed for lubrication with:0 min-1; Oil:3384.640 kN; Weight:0 min-1; D:980 mm; Pu:12180 kN; B1:mm; d:540 mm; D1:717 mm; B2 B Dynamic (Cr):mm; Static (Cor):mm; Grease:51000 kN; |
| HR32936J NSK CYLINDRICAL ROLLER BEARING | d:30 mm; Oil:11 000 min-1; with tapered bore:1206 ; Static (Cor):16.690 kN; B1:mm; D:62 mm; rs Dynamic (Cr):1 mm; Pu:4.730 kN; with cylindrical bore:13 000 min-1; B:16 mm; Grease:0.220 kN; |
| HR32952J NSK CYLINDRICAL ROLLER BEARING | dk:66 mm; l1 min.:110 mm; G:M 52x3; l7 min.:58 mm; Specific dynamic load factor K:150 N/mm²; Basic static load rating C0:245 kN; α:6 °; Basic dynamic load rating C:236 kN; C1 max.:31 mm; d2 max.:114 mm; h:195 mm; d:50 mm; Material constant KM:330; r1 min.:0.6 mm; l2 max.:254 mm; Mass rod end:3.9 kg; B:35 mm; |
| BJLM820048/JLM820012 NSK CYLINDRICAL ROLLER BEARING | H:317.5 mm; H2:63.5 mm; Housing:SAFS 530; Stabilizing ring:SR-30-0; H1:160.35 mm; P120°:149 kN; Appropriate attachment bolt size G:1 in; J1:95.25 mm; End plug (suffix Y):EPR 16; h:50.8 mm; RG:3/4 NPT; R1:95.25 mm; A2:215.9 mm; Bearing limiting speed:3000 r/min; PG:1/4 NPT; da:133.35 mm; P90°:236 kN; Labyrinth ring:2 x LOR 126; Pa:32.7 kN; Eye bolt:2 x 3/8-16 UNC; |
| R910-1 NSK CYLINDRICAL ROLLER BEARING | Basic Dynamic Radial Load Rating C:8060 N; B:16.00 mm; Fillet Radius ra:0.30 mm; d:10.000 mm; Grease Speed Rating n1:24000 rpm; Oil Speed Rating n2:29000 rpm; D:26.0000 mm; Fillet Radius rb:0.10 mm; Basic Static Radial Load Rating Co:4550 N; |
| HR32972J NSK CYLINDRICAL ROLLER BEARING | Static axial stiffness, preload class D:115 N/µm; Preload class B GB:100 N; Calculation factor f2D:1.18; ra max.:0.6 mm; Preload class A GA:50 N; db max.:52.1 mm; Attainable speed for grease lubrication:24000 r/min; r3,4 min.:0.3 mm; Calculation factor fHC:1.04; Calculation factor f0:10.5; Calculation factor f2A:1; Da max.:64.8 mm; Calculation factor f2C:1.12; rb max.:0.3 mm; B:12 mm; D:68 mm; |