| 68715A Franke Slewing Ring Bearings | Basic static load rating C0:200 kN; Basic dynamic load rating C:190 kN; Mass rod end:2.45 kg; Specific dynamic load factor K:150 N/mm²; d:45 mm; α:7 °; l1 min.:92 mm; l7 min.:50 mm; l2 max.:217 mm; B:32 mm; Material constant KM:330; C1 max.:28 mm; d2 max.:104 mm; h:163 mm; dk:60 mm; G:M 42x3; r1 min.:0.6 mm; |
| 66158L Franke Slewing Ring Bearings | Static axial stiffness, preload class D:67 N/µm; Calculation factor f2B:1.04; r1,2 min.:0.3 mm; Number of balls z:20; Static axial stiffness, preload class A:26 N/µm; Static axial stiffness, preload class B:35 N/µm; Preload class A GA:25 N; d2:35.6 mm; Preload class D GD:200 N; r3,4 min.:0.2 mm; Preload class C GC:100 N; Calculation factor f2C:1.09; D:47 mm; d:30 mm; Ball diameter Dw:4.762 mm; |
| 73101L Franke Slewing Ring Bearings | Ca:270 mm; Appropriate attachment bolt, rec. tightening torque:5450 N·m; Labyrinth seal:2 x TS 600; ba min.:220 mm; Locating ring:2 x FRB 10/780; A:470 mm; N1:56 mm; s:35 mm; ATS:480 mm; Eye bolt, size:2 x M 48; db:560 mm; Initial grease fill, 20%:12 kg; A1:440 mm; ATK:600 mm; Mass housing:930 kg; P120°:4000 kN; da:530 mm; Q150°:3350 kN; Cap bolt, rec. tightening torque:850 N·m; |
| 73118L Franke Slewing Ring Bearings | Housing:SAF 032 KA; P150°:68.1 kN; Cap bolt:2 x 1-8 UNC; Appropriate attachment bolt size G:0.875 in; PG:1/4 NPT; Taconite seal:TER 130; J max.:406.4 mm; A2:277.813 mm; Pa:25.4 kN; H2:60.325 mm; ba:59.531 mm; P90°:113 kN; R2:36.513 mm; H1:152.4 mm; Max. speed for Taconite seal:560 r/min; End plug (suffix Y):EPR 16; J1:82.55 mm; h:51.594 mm; P180°:84.5 kN; Cap bolt, SAE grade:8; |
| 77238A Franke Slewing Ring Bearings | Cap bolt, SAE grade:5; A1:60.325 mm; Ca:28.804 mm; H2:20.637 mm; End plug (suffix Y):EPR 3; h:25.4 mm; da:38.1 mm; Max. speed for Taconite seal:2175 r/min; Initial grease fill:51.03 g; L:209.55 mm; RG:1/8 NPT; J max.:177.8 mm; J min.:158.75 mm; H1:57.15 mm; H:112.713 mm; R1:28.575 mm; Mass pillow block:5.17 kg; R2:12.7 mm; Appropriate attachment bolt size G:0.5 in; S:4.763 mm; |
| 68491A Franke Slewing Ring Bearings | H:222.25 mm; Housing:SSAFS 520; P60°:141 kN; R1:58.737 mm; Cap bolt recommended tightening torque:298.3 N·m; h:42.069 mm; Labyrinth ring:2 x LOR 100; Cap bolt, SAE grade:8; Mass pillow block:21.8 kg; L:387.35 mm; RG:3/8 NPT; Ca:55.804 mm; Cap bolt:5/8-11 UNC; Bearing limiting speed:4500 r/min; A1:111.125 mm; da:84.138 mm; PG:1/4 NPT; ba:44.45 mm; P90°:84.5 kN; Initial grease fill:181.44 g; |
| 74100A Franke Slewing Ring Bearings | Fw:50 mm; Ew:55 mm; Reference speed:8500 r/min; Basic dynamic load rating C:25.5 kN; Limiting speed:9500 r/min; Fatigue load limit Pu:7.2 kN; Basic static load rating C0:60 kN; Mass needle roller and cage assembly:0.043 kg; U:20 mm; |
| 68506A Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:49000 N; Basic Dynamic Radial Load Rating C:66300 N; D:130.0000 mm; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating n1:4800 rpm; Oil Speed Rating n2:5600 rpm; Oil Speed Rating Open/Shielded n2:5600 rpm; Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:4800 rpm; B:25.00 mm; Fillet Radius ra:1.50 mm; d:75.000 mm; |
| 74092A Franke Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; Accessories:Two Seals & Snap-Rin; d:95.000 mm; D:200.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:2200 rpm; B:45.00 mm; Basic Static Radial Load Rating Co:118000 N; Oil Speed Rating n2:3800 rpm; |
| 74104A Franke Slewing Ring Bearings | Oil Speed Rating n2:5600 rpm; Fillet Radius rb:1.00 mm; D:110.0000 mm; Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:4300 rpm; B:44.00 mm; Fillet Radius ra:1.50 mm; d:60.000 mm; Basic Dynamic Radial Load Rating C:85200 N; |
| 77222B Franke Slewing Ring Bearings | Cap bolt:1 1/8-7 UNC; Pa:59.6 kN; H2:79.375 mm; R1:120.65 mm; Cap bolt, SAE grade:8; J max.:619.125 mm; Initial grease fill:1672.65 g; PG:1/4 NPT; P180°:160 kN; Appropriate attachment bolt size G:1.25 in; da:201.613 mm; RG:1 NPT; Ca:101.803 mm; H1:200.025 mm; Taconite seal:TER 167; Cap bolt recommended tightening torque:1735.4 N·m; J min.:549.275 mm; P90°:249 kN; P120°:151 kN; Eye bolt:2 x 1/2-13 UNC; |
| 66163L Franke Slewing Ring Bearings | d:75.000 mm; B:37.00 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:3500 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:125000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:116000 N; |