| 66141L Franke Slewing Ring Bearings | Accessories:Two Seals; Sealed Speed Rating n3:4300 rpm; Grease Speed Rating Open/Shielded n1:6700 rpm; Oil Speed Rating Open/Shielded n2:8000 rpm; Fillet Radius ra:1.00 mm; D:95.0000 mm; Basic Dynamic Radial Load Rating C:32500 N; d:60.000 mm; Basic Static Radial Load Rating Co:25000 N; B:18.00 mm; |
| 74078A Franke Slewing Ring Bearings | Calculation factor (single, tandem) Y2:0.87; Static axial stiffness, preload class C:89 N/µm; Static axial stiffness, preload class B:68 N/µm; Db max.:33.6 mm; Calculation factor e:0.68; B:10 mm; Calculation factor f1:0.99; Preload class B GB:150 N; Preload class C GC:300 N; Calculation factor f2B:1.03; Calculation factor (back-to-back, face-to-face) Y2:1.41; D1:29.3 mm; Mass bearing:0.035 kg; |
| 73112L Franke Slewing Ring Bearings | P120°:50.7 kN; Ca:55.804 mm; Da:180 mm; Initial grease fill:181.44 g; P150°:46.3 kN; H1:114.3 mm; ba:44.45 mm; H:217.488 mm; Mass pillow block:28.1 kg; P180°:55.6 kN; A2:222.25 mm; Taconite seal:TER 102; PG:1/4 NPT; N1:25.4 mm; Housing:SAF 520; RG:3/8 NPT; da:87.313 mm; Cap bolt recommended tightening torque:203.4 N·m; Appropriate attachment bolt size G:0.875 in; Cap bolt, SAE grade:5; |
| 68956A Franke Slewing Ring Bearings | Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Coefficient of friction µ max.:0.1; Mass bushing:0.002 kg; Specific static load factor K0:20 N/mm²; d:8 mm; D:12 mm; Permissible sliding velocity v max.:5 m/s; B:6 mm; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; |
| 77246B Franke Slewing Ring Bearings | N1:14.287 mm; Limiting speed:5100 r/min; A:57.15 mm; A1:72.231 mm; L:117.475 mm; a:2.381 mm; Basic dynamic load rating C:73.8 kN; B:69.85 mm; d2:62.706 mm; A6:19.05 mm; S:0.794 mm; da:36.513 mm; s:25.4 mm; Mass bearing unit:3.27 kg; A5:27.781 mm; J:88.9 mm; Attachment bolt diameter G:12.7 mm; |
| 77230A Franke Slewing Ring Bearings | rs (min):3 mm; r1s (min):2.5 mm; C:37 mm; d2:60 mm; D:130 mm; B:46 mm; Dynamic (Ca):200 kN; Static (Coa):293 kN; T:48.5 mm; r2s (min):1 mm; Pu:35.730 kN; a:39 mm; |
| 74104A Franke Slewing Ring Bearings | Oil Speed Rating n2:5600 rpm; Fillet Radius rb:1.00 mm; D:110.0000 mm; Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:4300 rpm; B:44.00 mm; Fillet Radius ra:1.50 mm; d:60.000 mm; Basic Dynamic Radial Load Rating C:85200 N; |
| 68318B Franke Slewing Ring Bearings | r3,4 min.:1.5 mm; C:350 mm; r1,2 min.:8 mm; D:480 mm; d:340 mm; b:11.1 mm; α:20 °; Basic dynamic load rating C:4950 kN; Calculation factor kr:650; B:350 mm; Design variant/feature:BC4.8/W33GWI; D1 ≈:435 mm; Basic static load rating C0:11000 kN; F:378 mm; Fatigue load limit Pu:1020 kN; Mass bearing:200 kg; K:6 mm; |
| 73124L Franke Slewing Ring Bearings | Calculation factor Y1:2; Calculation factor Y2:3; Calculation factor Y0:2; ra max.:3 mm; Da max.:385 mm; da min.:275 mm; Basic dynamic load rating C:2135 kN; Calculation factor e:0.33; D:400 mm; b:13.9 mm; d:260 mm; Basic static load rating C0:3450 kN; B:140 mm; K:7.5 mm; Fatigue load limit Pu:285 kN; d2 ≈:289 mm; Limiting speed:2200 r/min; D1 ≈:347 mm; Mass bearing:63.5 kg; r1,2 min.:4 mm; |
| 77202A Franke Slewing Ring Bearings | α:7 °; r1 min.:0.6 mm; B:32 mm; Material constant KM:330; Specific dynamic load factor K:150 N/mm²; l1 min.:95 mm; d2 max.:104 mm; Basic dynamic load rating C:190 kN; G:M 45x3; l2 max.:219 mm; h:165 mm; d:45 mm; C1 max.:28 mm; l7 min.:50 mm; dk:60 mm; Basic static load rating C0:200 kN; Mass rod end:2.55 kg; |
| 77254B Franke Slewing Ring Bearings | Grease Speed Rating n1:6000 rpm; Oil Speed Rating n2:8000 rpm; D:100.0000 mm; Basic Dynamic Radial Load Rating C:59200 N; Fillet Radius ra:1.50 mm; d:45.000 mm; B:25.00 mm; Basic Static Radial Load Rating Co:40000 N; |
| 77258B Franke Slewing Ring Bearings | d:8 mm; Mass inner ring:0.005 kg; B:10.5 mm; r, r1,2 min.:0.3 mm; F:12 mm; |