| 68651A Franke Slewing Ring Bearings | K:3.5 mm; da min.:138 mm; Fatigue load limit Pu:60 kN; Da max.:173 mm; d:130 mm; Mass bearing:3.8 kg; D:180 mm; r1,2 min.:1.5 mm; Calculation factor kr:0.25; Basic dynamic load rating C:297 kN; Basic static load rating C0:530 kN; ra max.:1.5 mm; b1:6 mm; E:165.4 mm; d1 ≈:149.5 mm; B:50 mm; Reference speed:1600 r/min; Limiting speed:2000 r/min; s max.:4 mm; |
| 68524A Franke Slewing Ring Bearings | Grease:10640 kN; Dynamic (Cr):12 mm; Pu:5600 kN; D:720 mm; Oil:765.770 kN; Static (Cor):22.3 mm; d:440 mm; with cylindrical bore:430 min-1; B:226 mm; with tapered bore:530 min-1; rs (min):6 mm; |
| 66151L Franke Slewing Ring Bearings | l5 ≈:40 mm; Basic dynamic load rating C:315 kN; Specific dynamic load factor K:100 N/mm²; l3 min.:80 mm; C1 max.:43 mm; Mass rod end:10.5 kg; d:70 mm; B:49 mm; Basic static load rating C0:530 kN; l7 min.:80 mm; l4 max.:349 mm; G:M 72x4; d2 max.:162 mm; α:6 °; d4 ≈:92 mm; w:80 mm; dk:92 mm; r1 min.:1 mm; h1:265 mm; Material constant KM:330; |
| 77260B Franke Slewing Ring Bearings | Recommended diameter for attachment bolts, inch G:0.5625 in; A3:3.2 mm; Limiting speed:850 r/min; J:105 mm; A:39 mm; A1:14 mm; Db1:102 mm; s1:26.5 mm; Fatigue load limit Pu:0.915 kN; Thread grub screw G2:M6; B1:44 mm; RG:1/4-28 UNF; Basic dynamic load rating C:33.2 kN; Recommended tightening torque for grub screw:7.4 N·m; d:42.862 mm; Housing:FY 509 M/VZ033; Hexagonal key size for grub screw N:3 mm; |
| 68713A Franke Slewing Ring Bearings | Pa:3.47 kN; P120°:17.3 kN; R2:15.875 mm; Ca:30.785 mm; J min.:187.325 mm; Housing:SAF 511; A2:171.45 mm; P180°:19.1 kN; Da:100 mm; P60°:44.9 kN; H1:69.85 mm; PG:1/8 NPT; ba:25.4 mm; RG:1/8 NPT; Taconite seal:TER 22; Cap bolt recommended tightening torque:81.3 N·m; End plug (suffix Y):EPR 5; P90°:27.1 kN; L:244.475 mm; N1:19.05 mm; |
| 68633A Franke Slewing Ring Bearings | Bearing designation:PLC 512-28 ; B1:220 mm; B:300 mm; Pu:1187.950 kg; d:950 mm; D:1250 mm; Weight:987 ; Static (Cor):20000 ; Dynamic (Cr):6400 kN; |
| 77262A Franke Slewing Ring Bearings | d:80 mm; h2:141 mm; d6:6 mm; Material constant KM:330; B:55 mm; α:6 °; dk:105 mm; l7 min.:98 mm; C1 max.:48 mm; l8:5 mm; l6 max.:237 mm; Basic dynamic load rating C:400 kN; r1 min.:1 mm; Basic static load rating C0:550 kN; Mass rod end:10.8 kg; Specific dynamic load factor K:100 N/mm²; d5 max.:97 mm; d2 max.:182 mm; |
| 77202A Franke Slewing Ring Bearings | α:7 °; r1 min.:0.6 mm; B:32 mm; Material constant KM:330; Specific dynamic load factor K:150 N/mm²; l1 min.:95 mm; d2 max.:104 mm; Basic dynamic load rating C:190 kN; G:M 45x3; l2 max.:219 mm; h:165 mm; d:45 mm; C1 max.:28 mm; l7 min.:50 mm; dk:60 mm; Basic static load rating C0:200 kN; Mass rod end:2.55 kg; |
| 68629A Franke Slewing Ring Bearings | Housing:FSAF 616; ba:46.038 mm; Cap bolt:2 x 3/4-10 UNC; Cap bolt, SAE grade:8; P150°:30.7 kN; End plug (suffix Y):EPR 8; P90°:55.6 kN; Ca:67.793 mm; RG:3/8 NPT; R2:26.988 mm; Max. speed for Taconite seal:1150 r/min; H2:44.45 mm; A1:98.425 mm; Appropriate attachment bolt size G:0.625 in; P60°:92.5 kN; P180°:36.9 kN; P120°:33.8 kN; J min.:269.875 mm; Pa:14 kN; A2:233.363 mm; |
| 68743A Franke Slewing Ring Bearings | Bearing:YAR 206-103-2RF/VE49; Recommended diameter for attachment bolts, mm G:10 mm; L:83 mm; J1:31.8 mm; A:32 mm; Recommended tightening torque for grub screw:4 N·m; Housing material:Composite for food a; Hexagonal key size for grub screw N:3.175 mm; J:47.6 mm; A5:26.9 mm; Basic dynamic load rating C:19.5 kN; Recommended diameter for attachment bolts, inch G:0.375 in; Fatigue load limit Pu:0.475 kN; |
| 68957A Franke Slewing Ring Bearings | dk:136.906 mm; Mass plain bearing:5.8 kg; Basic static load rating C0:2360 kN; rb max.:1 mm; da min.:101.6 mm; Specific dynamic load factor K:150 N/mm²; Sealing solution:Triple-lip seals; D:149.225 mm; Da max.:141.2 mm; B:83.337 mm; r1 min.:0.6 mm; C:71.425 mm; Design (sliding contact surface combination):Steel/PTFE fabric; da max.:108.6 mm; Da min.:136.2 mm; ra max.:0.6 mm; α:6 °; d:95.25 mm; |
| 71045A Franke Slewing Ring Bearings | r1,2 min.:3 mm; Dimension series:M 822000; Limiting speed:3600 r/min; r3,4 min.:2.5 mm; B:35 mm; a:37.513 mm; Da min.:145 mm; Basic dynamic load rating C:256 kN; db min.:123.5 mm; d:110 mm; D:165 mm; Mass bearing:2.53 kg; Cb min.:8.5 mm; Fatigue load limit Pu:37.5 kN; ra max.:3 mm; Basic static load rating C0:355 kN; Calculation factor Y0:0.7; Db min.:158 mm; d1 ≈:137.1 mm; Da max.:153.5 mm; |