| 68468A Franke Slewing Ring Bearings | Max. speed for Taconite seal:850 r/min; Mass pillow block:20.4 kg; P150°:44.5 kN; Cap bolt, SAE grade:8; RG:3/8 NPT; PG:1/8 NPT; P60°:138 kN; Housing:SAFS 216; Pa:33.8 kN; S:4.763 mm; End plug (suffix Y):EPR 9; h:31.75 mm; P120°:49.8 kN; Cap bolt recommended tightening torque:298.3 N·m; Taconite seal (dc shaft position):TER 54; Initial grease fill:175.77 g; db:92.075 mm; P90°:82.7 kN; |
| 71061A Franke Slewing Ring Bearings | Static axial stiffness, preload class D:252 N/µm; rb max.:0.6 mm; Number of balls z:19; Reference grease quantity Gref:8.1 cm³; Calculation factor f2B:1.02; Calculation factor f1:1; db min.:76 mm; Calculation factor f0:15.5; Calculation factor fHC:1.02; d2:82.3 mm; Static axial stiffness, preload class C:173 N/µm; d:70 mm; Calculation factor f2A:1; Mass bearing:0.5 kg; da min.:76 mm; |
| 68482A Franke Slewing Ring Bearings | Dynamic (Cr):58.400 kN; Pu:2.085 kN; Da:132 max; B:24 mm; Static (Cor):49.200 kN; Bearing designation:6018 ; d:90 mm; Grease:4 500 min-1; Oil:5 300 min-1; da:96 min; ra:1.5 max; Weight:1.17 kg; D:140 mm; rs:1.5 mm; |
| 66386L Franke Slewing Ring Bearings | Grease:351 kN; D:140 mm; with tapered bore:3 400 min-1; rs (min):2.1 mm; Oil:42.180 kN; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; d:65 mm; B:48 mm; Dynamic (Cr):3 mm; Pu:304 kN; |
| 66160L Franke Slewing Ring Bearings | S:4.763 mm; Cap bolt, SAE grade:8; R2:27.781 mm; ba:40.481 mm; P180°:58.7 kN; PG:1/8 NPT; A2:206.375 mm; H2:41.275 mm; A1:98.425 mm; End plug (suffix Y):EPR 11; P90°:84.5 kN; Cap bolt recommended tightening torque:149.1 N·m; RG:3/8 NPT; P60°:141 kN; Cap bolt:1/2-13 UNC; Stabilizing ring:SR-18-15; H:196.85 mm; Mass pillow block:31.3 kg; da:79.375 mm; P150°:48 kN; |
| 68504A Franke Slewing Ring Bearings | r5 min.:0.3 mm; Ca min.:4 mm; Calculation factor Y0:1.6; Da max.:73.5 mm; Basic dynamic load rating C:129 kN; Calculation factor Y1:1.6; 2B:40 mm; Calculation factor Y2:2.3; K:4.5 mm; Mass bearing pair:0.78 kg; rc max.:0.3 mm; ra max.:1 mm; da max.:57 mm; b:5.5 mm; d:50 mm; Fatigue load limit Pu:19.3 kN; Da min.:72 mm; Reference speed:5300 r/min; Calculation factor e:0.43; Basic static load rating C0:176 kN; |
| 77254A Franke Slewing Ring Bearings | d:38.1 mm; J7:17 mm; Limiting speed:950 r/min; s1:30.2 mm; N:24.5 mm; Hexagonal key size for grub screw N:3.969 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A5:23.5 mm; Basic dynamic load rating C:30.7 kN; H1:49.2 mm; B4:8 mm; N1:14 mm; N4:4 mm; Housing:SY 508 M/VZ033; L:175 mm; J min.:125 mm; Recommended tightening torque for grub screw:6.5 N·m; J6:161 mm; A1:30 mm; Thread grub screw G2:5/16-24 UNF; |
| 66165L Franke Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:7000 rpm; Basic Static Radial Load Rating Co:31000 N; Sealed Speed Rating n3:4900 rpm; Basic Dynamic Radial Load Rating C:55300 N; D:100.0000 mm; d:35.000 mm; B:25.00 mm; Fillet Radius ra:1.50 mm; Accessories:Shield & Seal; Oil Speed Rating Open/Shielded n2:8500 rpm; |
| 68958A Franke Slewing Ring Bearings | d:17.000 mm; Basic Dynamic Radial Load Rating C:8840 N; B:16.00 mm; Fillet Radius ra:0.60 mm; D:40.0000 mm; Grease Speed Rating n1:12000 rpm; Basic Static Radial Load Rating Co:2200 N; |
| 66392L Franke Slewing Ring Bearings | D:469.9 mm; d1 ≈:372 mm; Comparative radial load rating CF:950 kN; Design variant/feature:TQO/GWI; Basic static load rating C0:10200 kN; Calculation factor Y1:2; Calculation factor e:0.33; d:347.662 mm; Thrust factor K:1.76; Mass bearing:130 kg; r1,2 min.:1.5 mm; Basic dynamic load rating C:3800 kN; T:260.35 mm; D1 ≈:428 mm; Comparative axial load rating CFa:153 kN; Calculation factor Y0:2; |
| 68637A Franke Slewing Ring Bearings | Pa:27.4 kN; H1:133.35 mm; P120°:72.5 kN; ba:61.913 mm; Cap bolt recommended tightening torque:400 N·m; J1:69.85 mm; PosiTrac Plus contact element:2 x B10724-113; N1:22.225 mm; P150°:66.7 kN; A1:120.65 mm; RG:1/2 NPT; Ca:85.801 mm; da:107.95 mm; Housing:SAW 524; Cap bolt:2 x 1-8 UNC; End plug (suffix Y):EPR 14; Cap bolt, SAE grade:5; Initial grease fill:379.89 g; Appropriate attachment bolt size G:0.75 in; |
| 77240A Franke Slewing Ring Bearings | D:320.0000 mm; Basic Dynamic Radial Load Rating C:559000 N; B:130.00 mm; Oil Speed Rating n2:2100 rpm; Grease Speed Rating n1:1600 rpm; d:150.000 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:865000 N; |