| 68950A Franke Slewing Ring Bearings | d:35.000 mm; B:14.00 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:15800 N; Oil Speed Rating Open/Shielded n2:13000 rpm; Sealed Speed Rating n3:7000 rpm; Basic Static Radial Load Rating Co:10200 N; D:62.0000 mm; Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:10000 rpm; |
| 77260A Franke Slewing Ring Bearings | N:21.5 mm; H2:19 mm; J max.:128 mm; A:40 mm; N1:14.5 mm; Fatigue load limit Pu:0.475 kN; Mass bearing unit:0.49 kg; Recommended diameter for attachment bolts, mm G:12 mm; L:159 mm; Housing material:Composite for food a; Basic static load rating C0:11.2 kN; Thread grub screw G2:1/4-28 UNF; Limiting speed:3800 r/min; Basic dynamic load rating C:16.3 kN; B:38.1 mm; d:31.75 mm; Recommended tightening torque for grub screw:4 N·m; |
| 66180L Franke Slewing Ring Bearings | s:42 mm; Da max.:115 mm; D1 ≈:78 mm; D2:115 mm; H1:75 mm; ra max.:2 mm; Minimum load factor A:1.9; d:75 mm; da min.:126 mm; Fatigue load limit Pu:20.8 kN; R:125 mm; D3:165 mm; C:21 mm; Basic static load rating C0:610 kN; d1 ≈:160 mm; D:160 mm; Mass bearing (including seat washer where applicable):8.1 kg; H:69 mm; Basic dynamic load rating C:251 kN; r1,2 min.:2 mm; |
| 74096A Franke Slewing Ring Bearings | L:361.95 mm; J max.:320.675 mm; A1:98.425 mm; Appropriate attachment bolt size G:0.625 in; P60°:92.5 kN; da:68.263 mm; Initial grease fill:181.44 g; P150°:30.7 kN; A2:160.338 mm; P120°:33.8 kN; Stabilizing ring:SR-19-16; ba:46.038 mm; Max. speed for PosiTrac Plus seal:2150 r/min; P90°:55.6 kN; Pa:14 kN; Cap bolt, SAE grade:8; N1:19.05 mm; PG:1/8 NPT; J min.:269.875 mm; R2:26.988 mm; |
| 68544A Franke Slewing Ring Bearings | d1:145 mm; Da max.:214 mm; Basic dynamic load rating C:585 kN; D:225 mm; Basic static load rating C0:960 kN; B2 ≈:77 mm; B1:72 mm; Mass bearing + sleeve:8.9 kg; s1 max.:14.1 mm; da min.:156 mm; B:56 mm; Limiting speed:1000 r/min; Fatigue load limit Pu:93 kN; Misalignment factor k1:0.113; G1:15 mm; r1,2 min.:2.1 mm; da max.:190 mm; G:M 160x3; s2 max.:7.3 mm; ra max.:2 mm; |
| 73101L Franke Slewing Ring Bearings | Ca:270 mm; Appropriate attachment bolt, rec. tightening torque:5450 N·m; Labyrinth seal:2 x TS 600; ba min.:220 mm; Locating ring:2 x FRB 10/780; A:470 mm; N1:56 mm; s:35 mm; ATS:480 mm; Eye bolt, size:2 x M 48; db:560 mm; Initial grease fill, 20%:12 kg; A1:440 mm; ATK:600 mm; Mass housing:930 kg; P120°:4000 kN; da:530 mm; Q150°:3350 kN; Cap bolt, rec. tightening torque:850 N·m; |
| 68635A Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:61800 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; d:50.000 mm; D:110.0000 mm; Grease Speed Rating n1:6300 rpm; Basic Static Radial Load Rating Co:38000 N; Oil Speed Rating Open/Shielded n2:7500 rpm; Accessories:Two Seals; B:27.00 mm; Sealed Speed Rating n3:4300 rpm; |
| 68963A Franke Slewing Ring Bearings | Grease Speed Rating n1:5000 rpm; D:90.0000 mm; Fillet Radius rb:0.60 mm; B:36.00 mm; Oil Speed Rating n2:6600 rpm; d:55.000 mm; Basic Dynamic Radial Load Rating C:47500 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:51000 N; |
| 66185L Franke Slewing Ring Bearings | Oil Speed Rating n2:6300 rpm; d:65.000 mm; Basic Dynamic Radial Load Rating C:55900 N; Fillet Radius ra:1.50 mm; Accessories:Shield & Seal; D:120.0000 mm; Grease Speed Rating n1:5300 rpm; B:23.00 mm; Grease Speed Rating Open/Shielded n1:5300 rpm; Basic Static Radial Load Rating Co:40500 N; Oil Speed Rating Open/Shielded n2:6300 rpm; Sealed Speed Rating n3:3600 rpm; |
| 66160L Franke Slewing Ring Bearings | S:4.763 mm; Cap bolt, SAE grade:8; R2:27.781 mm; ba:40.481 mm; P180°:58.7 kN; PG:1/8 NPT; A2:206.375 mm; H2:41.275 mm; A1:98.425 mm; End plug (suffix Y):EPR 11; P90°:84.5 kN; Cap bolt recommended tightening torque:149.1 N·m; RG:3/8 NPT; P60°:141 kN; Cap bolt:1/2-13 UNC; Stabilizing ring:SR-18-15; H:196.85 mm; Mass pillow block:31.3 kg; da:79.375 mm; P150°:48 kN; |
| 68526A Franke Slewing Ring Bearings | Da:200 mm; H:244.475 mm; PG:1/4 NPT; A2:165.1 mm; RG:3/8 NPT; P150°:59.6 kN; ba:50.006 mm; Ca:62.89 mm; Cap bolt, SAE grade:8; Pa:17.3 kN; Mass pillow block:54 kg; Bearing limiting speed:4000 r/min; H1:125.425 mm; P180°:72.5 kN; Housing:SSAFS 522; Cap bolt:5/8-11 UNC; da:93.662 mm; R2:31.75 mm; A1:120.65 mm; S:4.763 mm; |
| 73095L Franke Slewing Ring Bearings | r, r1,2 min.:1.1 mm; Mass inner ring:0.18 kg; B:28 mm; F:60 mm; d:50 mm; |