| 74082A Franke Slewing Ring Bearings | Accessories:No Shield, no Seal,; d:90.000 mm; Sealed Speed Rating n3:2400 rpm; B:52.40 mm; Basic Static Radial Load Rating Co:120000 N; Basic Dynamic Radial Load Rating C:130000 N; Grease Speed Rating n1:2400 rpm; Oil Speed Rating n2:3400 rpm; D:160.0000 mm; Fillet Radius ra:2.00 mm; |
| 66398L Franke Slewing Ring Bearings | r1,2 min.:4 mm; da min.:744 mm; Reference speed:480 r/min; D:800 mm; H:78 mm; D1 ≈:675 mm; d:670 mm; Mass bearing (including seat washer where applicable):74 kg; Fatigue load limit Pu:57 kN; Limiting speed:670 r/min; ra max.:3 mm; Basic dynamic load rating C:540 kN; d1 ≈:795 mm; Da max.:726 mm; Basic static load rating C0:4150 kN; Minimum load factor A:90; |
| 77218A Franke Slewing Ring Bearings | B:42.9 mm; Thread length G1:12 mm; A:48 mm; Limiting speed:3200 r/min; Recommended tightening torque for grub screw:6.5 N·m; Hexagonal key size for grub screw N:3.969 mm; Housing material:Composite for food a; A5:28.8 mm; s1:25.4 mm; H:95 mm; Basic static load rating C0:15.3 kN; d:31.75 mm; H1:47.6 mm; J:82.6 mm; Fatigue load limit Pu:0.655 kN; L:110 mm; Basic dynamic load rating C:21.6 kN; |
| 77218B Franke Slewing Ring Bearings | Grease Speed Rating n1:1300 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2200 rpm; B:84.00 mm; d:170.000 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:312000 N; D:265.0000 mm; Basic Static Radial Load Rating Co:465000 N; |
| 66185L Franke Slewing Ring Bearings | Oil Speed Rating n2:6300 rpm; d:65.000 mm; Basic Dynamic Radial Load Rating C:55900 N; Fillet Radius ra:1.50 mm; Accessories:Shield & Seal; D:120.0000 mm; Grease Speed Rating n1:5300 rpm; B:23.00 mm; Grease Speed Rating Open/Shielded n1:5300 rpm; Basic Static Radial Load Rating Co:40500 N; Oil Speed Rating Open/Shielded n2:6300 rpm; Sealed Speed Rating n3:3600 rpm; |
| 68968A Franke Slewing Ring Bearings | d:110 mm; Threads per inch:12; Sleeve:S 22x3.7/8; B1:81.178 mm; Mass adapter sleeve assembly:2.25 kg; d3 max.:145.39 mm; G:109.855 mm; Hydraulic nut:HMVC 22E; B:20.091 mm; d1:98.425 mm; B4:23.012 mm; |
| 66388L Franke Slewing Ring Bearings | B1:2 mm; B:5 mm; Coefficient of friction µ max.:0.1; d:5 mm; D:9 mm; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Mass bushing:0.002 kg; D1:13 mm; Permissible sliding velocity v max.:5 m/s; |
| 74094A Franke Slewing Ring Bearings | B:320 mm; F:463 mm; b:16.7 mm; Basic dynamic load rating C:4680 kN; r1,2 min.:4 mm; Basic static load rating C0:10800 kN; Calculation factor kr:430; D:580 mm; Mass bearing:250 kg; Design variant/feature:BC4.7/W33GWI; D1 ≈:530.2 mm; Fatigue load limit Pu:950 kN; K:9 mm; C:320 mm; r3,4 min.:4 mm; d:420 mm; |
| 68617A Franke Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:92300 N; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; d:85.000 mm; B:44.00 mm; Basic Static Radial Load Rating Co:116000 N; Oil Speed Rating n2:14000 rpm; D:130.0000 mm; Grease Speed Rating n1:9600 rpm; |
| 73117L Franke Slewing Ring Bearings | PG:1/8 NPT; h:35.719 mm; da:55.563 mm; S:4.763 mm; P90°:36 kN; ba:40.481 mm; P120°:21.8 kN; Da:140 mm; P60°:60.5 kN; Cap bolt, SAE grade:8; Taconite seal:TER 32; P180°:23.1 kN; Ca:57.785 mm; RG:3/8 NPT; P150°:19.6 kN; H:167.481 mm; J1:53.975 mm; Housing:FSAF 613; N1:19.05 mm; Max. speed for Taconite seal:1400 r/min; |
| 68651A Franke Slewing Ring Bearings | K:3.5 mm; da min.:138 mm; Fatigue load limit Pu:60 kN; Da max.:173 mm; d:130 mm; Mass bearing:3.8 kg; D:180 mm; r1,2 min.:1.5 mm; Calculation factor kr:0.25; Basic dynamic load rating C:297 kN; Basic static load rating C0:530 kN; ra max.:1.5 mm; b1:6 mm; E:165.4 mm; d1 ≈:149.5 mm; B:50 mm; Reference speed:1600 r/min; Limiting speed:2000 r/min; s max.:4 mm; |
| 66144L Franke Slewing Ring Bearings | P180°:84.5 kN; ba:59.531 mm; PosiTrac Plus contact element:2 x B10724-130; Max. speed for PosiTrac Plus seal:1050 r/min; R2:36.513 mm; Mass pillow block:79.7 kg; Stabilizing ring:2 x 38151-32; L:466.725 mm; A2:206.375 mm; Ca:89.789 mm; Appropriate attachment bolt size G:0.875 in; RG:1/2 NPT; Da:240 mm; P120°:73.8 kN; Cap bolt, SAE grade:8; Initial grease fill:382.73 g; h:51.594 mm; J min.:371.475 mm; |