| 68314A Franke Slewing Ring Bearings | b1:8 mm; ra max.:2 mm; da min.:251 mm; D:320 mm; Mass bearing:18.5 kg; das:261 mm; d1 ≈:271 mm; Reference speed:850 r/min; r1,2 min.:2.1 mm; D1 ≈:291 mm; Calculation factor kr:0.25; Limiting speed:1100 r/min; Da max.:308 mm; Basic static load rating C0:1760 kN; B:80 mm; Basic dynamic load rating C:781 kN; d:240 mm; Fatigue load limit Pu:173 kN; K:4 mm; |
| 68739A Franke Slewing Ring Bearings | Basic static load rating C0:19 kN; Fatigue load limit Pu:0.8 kN; J max.:146 mm; Thread grub screw G2:M6; B1:42.9 mm; H1:49.2 mm; J min.:125 mm; Hexagonal key size for grub screw N:3 mm; J6:161 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A:48 mm; A5:23.5 mm; N1:14 mm; Mass bearing unit:1.8 kg; Limiting speed:950 r/min; Housing material:Cast iron; Housing:SY 508 M/VZ033; d:40 mm; Recommended tightening torque for grub screw:7.4 N·m; |
| 66184L Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:173000 N; Oil Speed Rating n2:4800 rpm; Fillet Radius rb:1.00 mm; d:65.000 mm; Basic Dynamic Radial Load Rating C:178000 N; B:65.00 mm; D:140.0000 mm; Grease Speed Rating n1:3700 rpm; Fillet Radius ra:2.00 mm; |
| 77250A Franke Slewing Ring Bearings | d2 max.:75 mm; l2 max.:149 mm; dk:40.7 mm; l1 min.:65 mm; C1 max.:20 mm; B:22 mm; h:110 mm; d:30 mm; Material constant KM:330; Basic dynamic load rating C:62 kN; r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; α:6 °; l7 min.:34 mm; Mass rod end:0.9 kg; Basic static load rating C0:81.5 kN; G:M 30x2; |
| 77232B Franke Slewing Ring Bearings | h:40.481 mm; da:104.775 mm; RG:3/8 NPT; Da:180 mm; H1:114.3 mm; Initial grease fill:181.44 g; Stabilizing ring:2 x 38151-24; P150°:48 kN; P180°:57.4 kN; Cap bolt:5/8-11 UNC; PosiTrac Plus contact element:2 x B10724-113; P90°:84.5 kN; End plug (suffix Y):EPR 14; Pa:16.7 kN; A2:155.575 mm; Max. speed for PosiTrac Plus seal:1350 r/min; P60°:141 kN; PG:1/4 NPT; Labyrinth ring:2 x LOR 112; |
| 74066A Franke Slewing Ring Bearings | J1:53.975 mm; PG:1/8 NPT; Cap bolt, SAE grade:8; J min.:250.825 mm; End plug (suffix Y):EPR 8; Ca:60.808 mm; Labyrinth ring (db shaft position):LOR 64; Housing:FSAF 314; N1:19.05 mm; RG:3/8 NPT; P90°:55.6 kN; Da:150 mm; Labyrinth ring (dc shaft position):LOR 43; A2:136.525 mm; Stabilizing ring:2 x SR-1614; Pa:24.5 kN; A1:88.9 mm; da:70 mm; J max.:279.4 mm; dc:66.675 mm; |
| 77240A Franke Slewing Ring Bearings | D:320.0000 mm; Basic Dynamic Radial Load Rating C:559000 N; B:130.00 mm; Oil Speed Rating n2:2100 rpm; Grease Speed Rating n1:1600 rpm; d:150.000 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:865000 N; |
| 66174L Franke Slewing Ring Bearings | B:16 mm; Basic dynamic load rating C:83 kN; d:20 mm; Specific dynamic load factor K:300 N/mm²; α:9 °; dk:29 mm; l1 min.:43 mm; Basic static load rating C0:51 kN; Mass rod end:0.32 kg; h:78 mm; r1 min.:0.3 mm; G:M 20x1.5; l7 min.:24 mm; d2 max.:54 mm; C1 max.:13.5 mm; l2 max.:107 mm; |
| 66386L Franke Slewing Ring Bearings | Grease:351 kN; D:140 mm; with tapered bore:3 400 min-1; rs (min):2.1 mm; Oil:42.180 kN; with cylindrical bore:2 600 min-1; Static (Cor):5.5 mm; d:65 mm; B:48 mm; Dynamic (Cr):3 mm; Pu:304 kN; |
| 68540A Franke Slewing Ring Bearings | P90°:3600 kN; H2:120 mm; P55°:7700 kN; Q120°:4200 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; A1:360 mm; J:840 mm; Cap bolt, size:M 36x240; N1:42 mm; Oil level, min.:84 mm; H1:350 mm; N:50 mm; P0°:6000 kN; L:1000 mm; da:340 mm; Appropriate attachment bolt, size G:36 mm; Oil level, max.:110 mm; P150°:2400 kN; Mass housing:454 kg; J1:220 mm; |
| 77214B Franke Slewing Ring Bearings | Cap bolt:2 x 3/4-10 UNC; P120°:35.6 kN; Pa:10.5 kN; Ca:69.799 mm; Cap bolt, SAE grade:8; Housing:SAF 617; Cap bolt recommended tightening torque:515.2 N·m; h:47.625 mm; P180°:38.3 kN; Stabilizing ring:2 x SR-1617; A2:173.037 mm; R1:65.088 mm; N1:25.4 mm; Da:180 mm; A1:111.125 mm; End plug (suffix Y):EPR 10; R2:30.163 mm; Bearing limiting speed:4800 r/min; Initial grease fill:365.71 g; |
| 77262B Franke Slewing Ring Bearings | RG:1/4 NPT; Ca:37.008 mm; ba:32.544 mm; Cap bolt recommended tightening torque:149.1 N·m; N1:19.05 mm; J min.:219.075 mm; H1:82.55 mm; J max.:244.475 mm; Pa:25.8 kN; Labyrinth ring (dc shaft position):LOR 46; Labyrinth ring (db shaft position):LOR 79; R1:46.038 mm; H2:30.163 mm; Cap bolt, SAE grade:8; Initial grease fill:68.04 g; Cap bolt:2 x 1/2-13 UNC; Housing:SAFS 215; L:285.75 mm; P60°:104 kN; |