| 66193L Franke Slewing Ring Bearings | d:15.000 mm; Fillet Radius ra:0.64 mm; D:35.0000 mm; Basic Dynamic Radial Load Rating C:11400 N; Grease Speed Rating n1:12000 rpm; Basic Static Radial Load Rating Co:6800 N; Sealed Speed Rating n3:12000 rpm; Accessories:No Shield, no Seal; Oil Speed Rating n2:17000 rpm; B:15.9 mm; D2R:33.200 mm; |
| 77238A Franke Slewing Ring Bearings | Cap bolt, SAE grade:5; A1:60.325 mm; Ca:28.804 mm; H2:20.637 mm; End plug (suffix Y):EPR 3; h:25.4 mm; da:38.1 mm; Max. speed for Taconite seal:2175 r/min; Initial grease fill:51.03 g; L:209.55 mm; RG:1/8 NPT; J max.:177.8 mm; J min.:158.75 mm; H1:57.15 mm; H:112.713 mm; R1:28.575 mm; Mass pillow block:5.17 kg; R2:12.7 mm; Appropriate attachment bolt size G:0.5 in; S:4.763 mm; |
| 77238B Franke Slewing Ring Bearings | dn:115.4 mm; r1,2 min.:1.5 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Static axial stiffness, preload class A:212 N/µm; db min.:102 mm; Reference grease quantity Gref:17 cm³; Calculation factor f2C:1.06; Static axial stiffness, preload class B:319 N/µm; Calculation factor f1:0.99; C2:4.3 mm; r3,4 min.:1 mm; Mass bearing:1.21 kg; D:145 mm; Calculation factor f:1.11; |
| 77210A Franke Slewing Ring Bearings | P120°:207 kN; R1:122.237 mm; PosiTrac Plus contact element:2 x B10724-552; h:56.356 mm; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; Mass pillow block:251 kg; P150°:185 kN; A1:203.2 mm; A2:295.275 mm; End plug (suffix Y):X-5217-4; da:215.9 mm; L:749.3 mm; ba:89.694 mm; Max. speed for PosiTrac Plus seal:640 r/min; P90°:334 kN; Cap bolt:1 1/4-7 UNC; Initial grease fill:2154.6 g; Ca:107.798 mm; R2:42.862 mm; |
| 77230B Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:19000 N; Weight W:1.70 kg; Distance J:143.7 mm; Diameter N:14.3 mm; Height T:54.2 mm; Dimension A1:38.9 mm; Dimension L:101.6 mm; Height H:171.5 mm; Insert Bearing IB:ZMaRC; Dimension A2:14.3 mm; Shaft Diameter D:40 mm; Basic Dynamic Radial Load Rating C:30700 N; |
| 68484A Franke Slewing Ring Bearings | Cap bolt, SAE grade:5; P150°:77 kN; H:360.363 mm; End plug (suffix Y):EPR 18; h:54.769 mm; S:4.763 mm; Appropriate attachment bolt size G:1 in; P90°:140 kN; R2:37.306 mm; Housing:SAW 534; Pa:56 kN; Stabilizing ring:SR-34-0; Cap bolt recommended tightening torque:203.4 N·m; da:149.225 mm; N1:28.575 mm; J max.:549.275 mm; J1:107.95 mm; H1:179.375 mm; A2:307.975 mm; Da:309.999 mm; |
| 68629A Franke Slewing Ring Bearings | Housing:FSAF 616; ba:46.038 mm; Cap bolt:2 x 3/4-10 UNC; Cap bolt, SAE grade:8; P150°:30.7 kN; End plug (suffix Y):EPR 8; P90°:55.6 kN; Ca:67.793 mm; RG:3/8 NPT; R2:26.988 mm; Max. speed for Taconite seal:1150 r/min; H2:44.45 mm; A1:98.425 mm; Appropriate attachment bolt size G:0.625 in; P60°:92.5 kN; P180°:36.9 kN; P120°:33.8 kN; J min.:269.875 mm; Pa:14 kN; A2:233.363 mm; |
| 68641A Franke Slewing Ring Bearings | Basic Radial Load Rating-Dynamic DC:13600 lbf; Basic Interchange BCA:-; Basic Interchange SPLIT:-; Basic Interchange:-; Basic Interchange NDH:-; Basic Radial Load Rating-Static SCO:48600 lbf; Basic Interchange NSK:-; Accessories:Mast Guide Type- 307; Basic Interchange MCGILL:-; |
| 66180L Franke Slewing Ring Bearings | s:42 mm; Da max.:115 mm; D1 ≈:78 mm; D2:115 mm; H1:75 mm; ra max.:2 mm; Minimum load factor A:1.9; d:75 mm; da min.:126 mm; Fatigue load limit Pu:20.8 kN; R:125 mm; D3:165 mm; C:21 mm; Basic static load rating C0:610 kN; d1 ≈:160 mm; D:160 mm; Mass bearing (including seat washer where applicable):8.1 kg; H:69 mm; Basic dynamic load rating C:251 kN; r1,2 min.:2 mm; |
| 68741A Franke Slewing Ring Bearings | d:25 mm; Mass inner ring:0.033 kg; F:30 mm; B:20 mm; r, r1,2 min.:0.3 mm; |
| 68655A Franke Slewing Ring Bearings | H1:133.35 mm; Ca:67.793 mm; P90°:111 kN; J min.:336.55 mm; Housing:SAF 224; Stabilizing ring:SR-24-20; Max. speed for Taconite seal:575 r/min; dc:115.888 mm; R2:30.163 mm; Taconite seal (db shaft position):TER 127; Initial grease fill:765.45 g; P60°:185 kN; Taconite seal (dc shaft position):TER 119; S:4.763 mm; Appropriate attachment bolt size G:0.75 in; Da:215.001 mm; P120°:72.5 kN; End plug (suffix Y):EPR 15; |
| 68623A Franke Slewing Ring Bearings | C:32.5 mm; Pu:42.990 kN; Static (Coa):370 kN; Dynamic (Ca):223 kN; D:140 mm; B:39 mm; rs (min):2 mm; a:28 mm; d2:90 mm; r1s (min):1.5 mm; r2s (min):0.6 mm; T:39 mm; |