| CONSOLIDATED BEARING 6312-Z C/4 Single Row Ball Bearings | Bearing Duty:Normal Duty; Grease Type:DuPont Krytox GPL 20; Base to Center Height:Not Applicable; Bearing Inner Ring Material:Steel; Shaft Attachment (2):Set Screw; Ball Material:Steel; Ball Bearing Housing Series:204 Series; Bearing Insert Material:Steel; Ring Size:Standard; End Cap Groove:No; |
| CONSOLIDATED BEARING 6014 NR C/2 Single Row Ball Bearings | rs min:0.3 mm; da min:10 mm; Characteristic outer ring frequency, BPF0:2.57 Hz; Characteristic inner ring frequency, BPFI:4.43 Hz; Mass:0.01 kg; Min operating temperature, Tmin:-20 °C; Dynamic load, C:3.15 kN; Radial clearance class:CN; Nref:32,000 rpm; da max:11.2 mm; |
| 1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.563 Inch | 39.7 Millimeter CONSOLIDATED BEARING 5309-ZZ Angular Contact Ball Bearings | A2:45.5 mm; d1:52 mm; s1:25.5 mm; e:20 mm; Designation of bearing:UK307G2H-19; B:33 mm; Adapter sleeve reference:H2307-19; G:M6x1; Designation of housing:F307-; A1:16 mm; Size (mm):1.772 Inch | 45 Millimeter x 3.937 Inch | 100 Millimeter x 1.563 Inch | 39.7 Millimeter ; |
| CONSOLIDATED BEARING CRSBCE-30 Cam Follower and Track Roller - Stud Type | Characteristic inner ring frequency, BPFI:4.86 Hz; Characteristic cage frequency, FTF:0.39 Hz; da min:19 mm; Characteristic rolling element frequency, BSF:4.47 Hz; B:10 mm; Brand:NTN; d:17 mm; Radial clearance class:CN; Dynamic load, C:6.8 kN; Mass:0.04 kg; |
| 2.5 Inch | 63.5 Millimeter x 3 Inch | 76.2 Millimeter x 0.25 Inch | 6.35 Millimeter CONSOLIDATED BEARING KA-25 ARO Angular Contact Ball Bearings | Weight / LBS:3.5675; Category:Single Row Ball Bear; Outside Diameter:7.087 Inch | 180 Mil; Inch - Metric:Metric; Characteristic inner ring frequency, BPFI:9.36 Hz; Inventory:0.0; Snap Ring:No; Inner Race Width:0 Inch | 0 Millimete; Harmonized Tariff Code:8482.10.50.68; Characteristic outer ring frequency, BPF0:7.64 Hz; Size (mm):2.5 Inch | 63.5 Millimeter x 3 Inch | 76.2 Millimeter x 0.25 Inch | 6.35 Millimeter ; |
| CONSOLIDATED BEARING 305707-ZZ Cam Follower and Track Roller - Yoke Type | B:31 mm; S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; H2:62 mm; T min.:-20 °C; Designation of housing:PA204N-; G:M6x1; Weight:0.64 kg; H1:11 mm; C0:6.65 kN; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter CONSOLIDATED BEARING QJ-310 C/3 Angular Contact Ball Bearings | H:47.6 mm; Weight:1.52 kg; A1:27 mm; S:17.5 mm; Dz:80 mm; L:110 mm; s1:21.45 mm; C:25.7 kN; G:M6x1; J:80 mm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter ; |
| 1.563 Inch | 39.7 Millimeter x 1.875 Inch | 47.625 Millimeter x 1.25 Inch | 31.75 Millimeter CONSOLIDATED BEARING MI-25-4S Needle Non Thrust Roller Bearings | Designation of bearing:EX204-12G2T04; C0:6.65 kN; SW:3.18 mm; H:72 mm; Recommended tightening torque for set screw:3.7 Nm; A3:1.5 mm; T max.:100 °C; B:34 mm; T min.:-40 °C; A:20 mm; Size (mm):1.563 Inch | 39.7 Millimeter x 1.875 Inch | 47.625 Millimeter x 1.25 Inch | 31.75 Millimeter ; |
| CONSOLIDATED BEARING 1306-K C/3 Self Aligning Ball Bearings | Weight:0.43 kg; Designation of housing:F203-; N:12mm; Recommended tightening torque for set screw:3.7 Nm; J:64 mm; A2:37.1 mm; A:25.5 mm; T min.:-40 °C; S:6.5 mm; B1:28.6 mm; |
| 4.331 Inch | 110 Millimeter x 9.449 Inch | 240 Millimeter x 3.625 Inch | 92.075 Millimeter CONSOLIDATED BEARING A 5322 WB Cylindrical Roller Bearings | D:160 mm; da max:119 mm; Characteristic rolling element frequency, BSF:7.82 Hz; ra max:2 mm; Fatigue limit load, Cu:2.6 kN; rs min:2 mm; Static load, C0:65.5 kN; Dynamic load, C:72.5 kN; Characteristic cage frequency, FTF:0.44 Hz; Da max:151 mm; Size (mm):4.331 Inch | 110 Millimeter x 9.449 Inch | 240 Millimeter x 3.625 Inch | 92.075 Millimeter ; |